Technical Specifications
    Operating Voltage: +12 VDC (+/- 10%)      Operating Current: 140 mA Idle
                                   20.5-42 VDC (MDB)                                   500 mA Validating
                                  117/220 VAC (Optional)                             1.1 A Stalled
Operating Temp: 0C – 60C (32F – 140F)      Notes Accepted: Up to 20 Denominations
                               90% Non-Condensing
Note Orientation: Four (4) Ways Interface     Options: Pulse, Parallel, Serial,
                                                                                          True RS232, USB, ccTalk
    Sensor Suite: Vector: Optical, UV I/O         Ports: 16 Pos Mating Connector
                                      Vector ad: Optical, UV,     (USB Female A on USB model)
                                      Magnetic                        RS232 Jack for PDA/PC Uploads
Mounting: Can be mounted at any angle.       Future Stacking Option: Vector ad only
  Net Weight: .68 Kg (1.5 lbs)                          Note Width: From 60 mm up to 85 mm
  Validation Options: Coupons,                      Bar Code Warranty: 1 Years Parts and Labor
 Acceptance Speed: 22 notes/minute approx dependent upon interface type.

ESD Precaution                                                                           
The Vector bill validator is intended for use as an internal
component of a host machine. Proper grounding is achieved
by connecting the Vector metal mounting bracket to the
metal surface of the host machine chassis.
To minimize electrostatic discharge, observe the following precautions:
?  When removing Vector from an antistatic bag, or  the  host machinecabinet, lay it on an antistatic surface such as an ESD mat  or adisposable antistatic mat.
?  Always wear an antistatic wrist strap connected to a suitable(grounded) metal surface on the chassis of the host machine when working on Vector.
?  Do not touch the I/O ports by hand.
?  Do not disassemble the unit.